For someone this homemade It will be funny, for someone nasty, but for many and useful. Such a thing as clogged pores is found in almost any person, the fat accumulated in the pores blackens over time, and it can also become inflamed, as a result, acne forms. Of course, blackheads can simply be squeezed out, but after that red spots remain on the face, and the process is quite painful. To solve the problem, one author decided to build a special aspirator to help in this difficult matter. If the home-made you are interested in, I propose to study the project in more detail!
Materials and tools used by the author:
Material List:
- compressor from the refrigerator;
- writing pen case with cap;
- rubber hose;
- clamps;
- switch;
- cable with plug.
Tool List:
- scissors;
- soldering iron;
- ;
- sandpaper or grinder;
- a hacksaw for metal.
Homemade manufacturing process:
Step one. Compressor
The first thing we get is a compressor, we get it out of the old refrigerator. We cut off the excess parts of the tubes from the compressor with a hacksaw for metal. We need a suction tube to determine where which one, turn on the compressor and determine the tube by applying a finger.
Step Two Nozzle
Next, we need to make a nozzle that will participate directly in the process of removing blackheads. Of course, the nozzle will need to be cleaned, so that it should be easy to remove. To solve the problem, the author used a pen case with a cap. We cut off the back of the handle, the suction hose will be attached here. As for the cap, its tip must also be cut off and then the edge treated with sandpaper so that it does not injure the skin.
That's all, connect the hose and fix it with clamps.
Step Three Switch
The homemade product is ready, it remains to equip it with a convenient switch. The author mounts the switch in a plastic box mounted on the compressor housing. Solder the wires, and now the homemade product is ready.
We turn on the compressor and place the nozzle over the area with a black dot or sore spot.The eel itself will also pop out of the skin, which will shrink when it is sucked into the tube. Everything works quite efficiently and not as painfully as if you crush acne with your fingers.
To control the suction force in the handle, you can drill a hole, close the hole with your finger, and the nozzle sucks, remove the finger and the nozzle turns off.
On this project can be considered successfully completed, I hope you liked the homemade work, and you found useful thoughts for yourself. Good luck and creative inspiration, if you decide to repeat this. Do not forget to share your ideas and homemade things with us!