This trimmer was purchased in the middle of the zero, and after one or two summer seasons it broke.
More precisely, it worked for about 5 minutes and began to overheat and smoke) Yes, it often broke, but it was usually easily repaired. Then tired of messing with him. I threw it into a garage pit and bought a Chinese brushcutter. After a couple of years, this electric trimmer gave to a friend, he wanted to change the engine, but over the next couple of years his hands did not reach him either. Then I took it back and decided to frown. The face is round, the rotor heats up quickly, the increased sparking of the brushes and the rapid consumption of these same brushes. For the sake of the experiment, I completely disassembled the engine, I completely shed the windings on the rotor and stator with a zaponlak, I do not have a normal winding varnish. Something like varnish spilled into the windings, somewhere where with a brush the varnish blotted between the turns.
I fitted the electric brushes out of larger brushes, since there is access to this good at work. At least do new ones every week) It turned out to be a blunder, I thought nothing would change, and lo and behold, after the build it worked fine. I thought the measure was temporary and over time it will break the winding somewhere again, but it works quietly for about 20-30 minutes and heats up slightly, I leave it to rest for about 20 minutes, drink some tea and smoke, and again go into battle) The whole garden usually went all the same , and I used this electric trimmer to mow grass on the lawn, there the ground is even and the wheels ride well. The idea with wheels arose spontaneously, found a three-wheeled grand daughter in the country, and decided to pin the rear axle to the trimmer.
At first I thought it would turn out nonsense, but the design turned out to be normal in terms of use. I trimmed the trimmer cover a little, and separated it from the axis with the rubber bands of the Moskvich stabilizer so that it was not a rigid mount, but a soft one. With a hard fix, I think the casing will burst on the bumps. And with rubber bands like on shock absorbers it turns out.Of course, an electric trimmer cannot be compared with a benzokos; gasoline usually has more power. And the electric motor sags in revolutions in the thick grass. I got two braids, with a trimmer went a quarter of the lawn, and left to cool, switched to a gas trimmer, it even overheats faster, mowed for 15-20 minutes, and left to cool, took up the trimmer again. When you get to the cottage only on weekends and sometimes not always, then usually you have to mow the grass every time somewhere.
So I got a lawn mower.
No matter how ridiculous she looked from the side, she really became much more convenient in circulation. You can trust this scythe to both your daughter and wife, the level of the vacuum cleaner) go ride it here, you don’t need to keep the height, you also do not need to fool with the launch. I plugged the vidka into a power outlet and drove him on the lawn to roll it)
I apologize for the scarcity of information, the material was shot back in the summer of 2016, the video was made for YouTube only in July 2018. At the time of writing this article (14.05,2019) there are only 373 views, no one is interested in the process. I hoped the topic would drop in, and people would appreciate, but not even comment, it’s a crazy idea.
I hope this article is at least useful to someone.
