» Topics » Advice »The necessary device from a simple bolt, which is done not only quickly, but also very simply

The necessary device from a simple bolt, which is not only fast, but also very simple

Any mechanic and master will have a large pile of junk material, which, if you think a little and reflect, can become a good tool or device to facilitate work and improve its quality.



Today we will try to make a collet clamp (chuck). It is very convenient. device for files, taps, saw blades, etc. etc.

This device is made two times, does not require great professional skills and is available to anyone, even a novice master.

And so, we need one bolt and one nut.
Of the tools - a hacksaw for metal or a cutting machine, a drill, a file, an emery cloth.

The manufacturing process (detailed in the video clip below):






1. We make two cuts of the bolt head.
2. Turn the bolt head under the cone.
3. We make another cut of the bolt by two or two and a half centimeters.
4. Turn the part of the nut under the cone.
5. We assemble the device.
6. We use it.

Video instruction for manufacturing a collet clamp (chuck)

Suitable for topic

Related topics

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
19 comments
Guest Vladimir
For tapping, there are wrenches including mechanical ones.
Guest Andrey
There is a tool - tap holder. The master should not be engaged in the manufacture of tools for making tools. I only make a tool that cannot be bought.
I also always think so, but ...
Sometimes ... In general, in a fire and x .. - a pump! )))))
Author
That you are fixated on threading. You are right about the cross member, but the task of manufacturing a collet clamp was not specifically for threading. The material gives the very idea of ​​this collet clamp, and you are already adjusting the device yourself, relying on your imagination, skill and needs. If you deploy all the possible options for the evening is not enough. :-)))
Guest guest.
This will be convenient if you weld a small cross on the opposite edge, for which you will hold this tool when cutting, will be more functional. And with this option, it is necessary to cut two turns of the cutter with a tap, one turn back, bite the tap a little and when you try to turn back, the lamb will simply unscrew.
You do not write a dissertation, who needs to understand
Translate me this type of size
And here I am, sometimes I take a grinder and cut it not by 15 millimeters, but by one and a half centimeters !!! And, do not believe it, the same thing happens !!!
But, only at the same time, no one sees how I am a niipazzaslesar ... But I already put up with this ... smiles
Author
Yes, it turned out a crooked statement of thought, I agree ... Guilty.
- We do a longitudinal cut of the bolt, in the direction from the head, through the center, to a depth of 20 - 25 mm.
Vasya Pupkin
3. We make another cut of the bolt by two or two and a half centimeters.
Translate me this type of size.
Doubts that you have ever used collet fixtures
I always considered the instrument to be an extension of my hands! Working with a good tool is much more pleasant, respectively, and the result is better (there are fewer mothers). It is extremely inconvenient to use this particular device.
Author
This is done 10 - 15 minutes, you can not find them? Or you have global ideas, but they also need a tool. T.ch. or buy, or do ... :-)))
Guest Sergey
When neither business nor worries, then of course you can do such garbage. Eh, I would have your problems.
Author
Collet clamp from a bolt. I'm Yutuber, a habit ... :-)))
The necessary device from a simple bolt, which is not only fast, but also very simple
A weakabout to call not in Yutiubovsky meaningless, but in human terms: "Collet clamp from a bolt"?
I work normally with collet fixtures, I do it for a specific tool, for which there are no standard solutions.
Author
Quote: Oltaviro Oltaviro
Fixture for fixture? What about usability?

Take a tap in your hands and cut the thread. I answered your question?
Fixture for fixture? What about usability?
Author
You are absolutely wrong, about the handle in the video indicates how the holder works for five. Doubts that you have ever used a collet fixture ... Sorry.
Guest Nick67
The under-tool, as the handle is inconvenient, as the holder is doubtful.

We advise you to read:

Hand it for the smartphone ...