In this article, the Wizard will tell us how to make a modern coffee table. The table is made of maple board and maple plywood and has rounded edges.
Tools and materials:
- Maple plywood;
- Maple board;
- Joiner glue:
-Miter saw;
- dowels;
- Grinding machines;
- Electric jigsaw;
-A circular saw;
-Band-saw;
-Manual frezer;
-Protective covering;
Step One: Countertop
The craftsman makes a countertop from a maple board. The master has three boards. Saw each board into two. Glues boards.
Trim the edges of the boards.
Cut grooves for dowels.
Now the boards need to be glued into one countertop. Apply glue. Sets dowels. Glues boards.
Next, the workpiece must be sanded.
Marks and trims, in a semicircle, the edges of the countertop.
Step Two: Feet
The master makes legs of plywood. Cuts plywood sheet into strips. Glues them in three pieces.
Cuts the ends of each workpiece in a semicircle. Two blanks cut the middle part, this will be the top of the legs.
Glues workpieces. Pre-installs countertops.
Step Three: Crossbar
Measures the distance between the legs. Cuts two plywood strips of the same length. Glues them. The upper part of the legs cuts out grooves for installing the crossbar.
Fourth step: grinding, coating, assembly
Grinds legs. Glues the crossbar. Covers the countertop and legs with a protective decorative coating.
Now it remains to install and fix the countertop and the table is ready.
The whole process of making a coffee table can be seen in the video.