Hello everyone, today I will tell you how the master did do it yourself Iron legs for a coffee table.
so, let's begin
Tools and materials:
1. Profile
2. Drill
3. Grinder
4. Skin
5. Balkarka
1. The author unscrewed the wooden legs from the table.
2. Next, I marked the dimensions on the iron profile and cut into pieces.
3. Drilled holes for fixing the legs to the countertop.
4. I cut the angle at the board in order to expose the legs at an angle for welding.
5. After he drilled and cut all the workpieces, he set the legs together with a magnet and welded all the workpieces.
6. Next, I cleaned all the seams with a grinder.
7. The author measured the length of the profile for the transverse strut, cutting off the desired size, he welded the legs together.
8. Put three layers of black paint.
9. Put the legs on the table and screw them in place.
10. Done