In this article, the author of the YouTube channel "1000 DIY's and Advice" will tell you how to use the improvised means to get a wire with a pin from various types of ISO connectors.
Such connectors are found in car radios, computer power supplies, and in many other devices.
Materials
- ISO connector.
Instruments, used by the author.
- Bent needle.
Pulling process.
Of course, for such purposes there are specialized pullers, they can be purchased.
But for the reason that such a task is very rare, you can use a regular needle. It is desirable that she had this form.
Now you need to consider on which side the special antennae are located on the pin itself, with which the wire is crimped. And then bring the needle to the antennae, and bend it towards the pin, pressing on it. Often, such a mustache is on both sides, so you need to repeat the operation on the second side.
So easily now you can pull the wire out of the connector.
In order to return the pin to its place, and it clicked into place, you need to restore the position of the antennae, slightly bending them.
Now the restored pin can be inserted into the connector until it stops. A soft click should be heard.
That's all for me, now you can replace a broken connector or wire yourself.
Thanks to the author for a simple but useful tip!
All good mood, good luck, and interesting ideas!
Author video can be found here.