Electrode storage tube (My manufacturing option)

Good afternoon! I offer a tube for storing electrodes to a home craftsman. Tidied up the spring in the garage. Having opened a pack with electrodes for a welder, I found out that they are half-baked, covered with some whitish coating. I thought about what a sealed storage could be made of. I searched the Internet for a solution. I chose the sewer pipe d = 50mm. The whole set, including the pipe, two plugs, an extension cord and a latch bracket, cost me less than a hundred rubles. The manufacture of this device took about an hour. Pay attention to how I solved the problem of a dropdown bottom. He fastened the cap with a knitting wire of cross-to-cross and tightened a lawyer Egorov with a collar clamp. In the latch bracket, I drilled two holes for the rope. It turns out that the bracket is used for carrying, hanging, etc., and prevents the tube from rolling off a flat and smooth surface, say a table, workbench or shelf. Foamed polystyrene was inserted into the plugs so as not to pierce them with electrodes.
I recommend for repetition!