» Joiner »Folding chair per hour

Folding chair per hour

Joiner / Tables and chairs
Added 6 comments

This chair was made specifically for the contest "Homemade per hour "and the master spent exactly 59 minutes 20 seconds on its manufacture.

Tools and materials:
-Bars;
-Threaded rods;
-Nuts;
-Washers;
-A circular saw;
-Drill;
-Roulette;
-Pencil;
-USHM;

Step One: Material Procurement
First, the master cuts the bars to size. Then he drills holes in them.



Step Two: Threaded Rod
To fasten the bars, the master cuts the threaded rod. Four segments are needed.

Step Three: Build
Then the master unfolds the bars in a certain order and inserts threaded rods into the holes. Tightens the nuts. Cuts excess thread.









The chair is ready.


The whole process of making such a chair can be seen in the video.
7.6
4.4
7
5
Added 6 comments

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
6 comments
0
Reply To quote A complaint
The following craft. This brother has already tidied up for fishing.
And here the risk is minimal and it is visible. But I won’t convince. I will double-check it myself and compare the drawings when I have a shortage of material.
0
Reply To quote A complaint
Quote: diagnoz160
In principle, the layout is clear. Already repeated ...

If not difficult, discard what happened. I have a lot of stress with the material, I don’t even want to spoil one rack.
+1
Reply To quote A complaint
In principle, the layout is clear. Already repeated. There are bars, studs too. Shortened the small bars a little, - the back lifted. Not for relaxation, but for a break in the yard or by the car will do. I had to rehearse a little, but turn on the brains.
Author 0
Reply To quote A complaint
Yes, there are no sketches, nor descriptions of sensible ones, especially the calculation of the backrest inclination.
+1
Reply To quote A complaint
And threaded rods are called studs.
0
Reply To quote A complaint
The idea is good, I wanted to repeat it, but the description is completely uninformative. I wanted to see sketches indicating what size affects what (for example, height, backrest), and I saw a man stomping around a table ...

DIY categories

We advise you to read:

Hand it for the smartphone ...