Summer is in full swing and it's time to think about how your pets will winter. As the saying goes, "Prepare a cart in the winter, and a warm doghouse in the summer." So the Master decided to make his dog a warm booth.
Tools and materials:
-Pallets;
- OSB;
-Styrofoam;
-Fasteners;
-Soft glass 2 mm;
- Impregnation for wood;
-Paint;
-Glue;
- Electric jigsaw;
-Scissors;
-Drill;
-Gon;
-Sandpaper;
-Screwdriver;
-Painting brush;
- Clamps;
-Garden lamp;
Step One: Pallets
In the construction of the booth, the master uses pallets and a board of them. He needs to sort out several pallets.
Step Two: OSB
OSB is an oriented particle board. With this material, the master will plank the walls. Having calculated the dimensions of the walls, ceiling and cover, the master cuts out the blanks in duplicate. In two, because the walls will be double.
Step Three: Case
The base of the booth is a pallet. On the base, the master fixes the outer walls of the booth.
Step Four: Thermal Insulation
Foam is used for thermal insulation. The master fixes the foam panels on the inside of the walls and floor.
Then fastens the inner walls.
Step Five: Porch
Before the entrance, the master installed a porch and sheathed it with boards.
Step Six: Soft Glass
The booth is insulated, but has one weak spot, cold air will enter through the entrance. The master partially solved this problem by fixing soft glass at the entrance. Soft glass is a thick PVC film.
Seventh step: finish
The master covers the booth with protective impregnation from the inside and paint from the outside. Above the entrance, an LED solar lamp is installed.
Step Eight: The Roof
The roof is also made with insulation inside. It is hinged and can be lifted if necessary.
On top of the roof, the master nailed the bars.
The booth is ready, now you can be sure that the dog will not freeze in winter.