» Furniture » Tables and chairs »Table - do-it-yourself picnic basket (transformer)

Table - do-it-yourself picnic basket (transformer)

Hello dear readers andthe inhabitants of our site!
I continue the theme of folding chairs and picnic tables.
In this article, the creator of YouTube channel “Creates DIY” will tell you how he made a table - a transformer for a picnic, which easily turns into a basket for products.

This homemade product is not very difficult to perform, and can be made without the use of a power tool.

Materials
- pine board
- Wood screws
- Stain
- Furniture hinges
- Wooden round timber
- Sandpaper.

Instruments, used by the author.
— 
— 
— 
— 
— 
- Feather drills for wood
- Square, ruler, marker, miter box, hacksaw, vise.

Manufacturing process.
So, the author acquired several pine boards, and cut them into blanks 500 mm long.



Then, on two boards, he applied symmetrical markings for the side parts of the table. It will be simultaneously the legs of the table and the upper part of the basket handles.




I fixed the workpiece on the workbench, and cut it out according to the marking with an electric jigsaw.



The edges of the slices were carefully sanded with sandpaper manually.

Using the first two parts as a template, transferred their contours to the second pair of planks, and cut out two more blanks.

The master polishes all surfaces with an orbital machine.

Now I fixed a petal grinding nozzle in the screwdriver's chuck, and processed the curly surfaces. Such a nozzle can be made quite simply by reading this article.


Tightens the workpiece with a clamp, and drills a hole for the handle with a pen drill in the upper part.



Transferring contours from the first pair of workpieces, and drill the second.



These are the sidewalls.

On the remaining five planks, the master applies marks for drilling.

The details are processed, the ends are milled with a radius mill, now you can assemble a table. First, the master drills the pilot holes with a countersink drill. Then it pulls together the parts with self-tapping screws. Two halves of the tables are ready.





With the help of a miter box and a hacksaw, he cuts off the required length of a wooden round timber.


Then it cuts it lengthwise into two halves, polishes the details obtained.




Now follows the stage of processing parts with stain and impregnation. It can be further waxed.





The halves of the table join together, installing a fifth board between them. At the basket it will be the bottom.



Then screw four furniture hinges.


Actually, the moment the handles are installed in their places.



The last two pieces will play the role of legs in table mode. Having picked up the height, and cutting off the workpieces, screws them to the central board.



Here is such a small basket turns into a very comfortable table.





Previously was interesting article about a folding chair, this master also made it.

Thanks to the author for the simple but very successful idea of ​​a transformer table for outdoor recreation!
All good mood, good luck, and interesting ideas!

Author video can be found here.
10
9.8
9.8

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
15 comments
There is a lot of continuation of this joke- "I peed on the fence and only nails remained" or a call to a friend, a drinking companion: "Do not go" for the most, "I’m calling you from America now ..."
Water is generally a panacea for all diseases! For example, I can share the recipe ...
On a glass of alcohol - five drops of boiled water! When taking it again, it is recommended to reduce the amount of water in order to avoid overdose!
Checked. It helps a lot!
And in another version, he then mowed hay without pants, holding a scythe with one hand, and thrust his second finger into his ass! ))). Because .... "Yes, they treated me some rubbish the other day, freaks! I pulled - behind me, two hay bales were burned!"
Khatul Madan
And the day before you need to drink 200% alcohol
60 percent water - a new diet drink. Recommended for people with excess WATER in the body. Easy to drink, promotes appetite and good mood. Emancipation of consciousness. Composition: water - 60%, preservative (ethyl alcohol) - 40%
goodgood
And the day before, you need to drink 200% alcohol from a joke, when they decided to taste it, then everyone was cut off from one smell, and only the Russian, wiping a glass and wiping his lips with his sleeve, stated, “Already diluted, scum.”
To hang out with the "Royal" ???? Hard!))))
Well then drink the day before ???

Yes and ... As far as I remember my "piano experience", after it in the morning a glass of water is enough to drink!)))))
It is necessary to maintain a harmonious image. )))
Author
Vanya, Ava is beautiful!
Explain ... dontknow
Author
NO, not these. Hinges, not boards.
Quote: LeoBrynn
Yeah, also the author has not fixed the hinges. Left on glue ... Gee.

These or what others?

12th picture below.
Author
Yeah, also the author has not fixed the hinges. Left on glue ... Gee.
The idea is very good, but the design is heavy and not technological.
Author
I also thought about the latch. Two clips for water pipes are a bit cut off, and that's it!
Not bad in my opinion. Only some kind of latch is necessary on the handle or in another place, so that it would not decompose spontaneously. And perhaps to make it easier to use plywood.

We advise you to read:

Hand it for the smartphone ...