» Fixtures »Self-winding extension cord

Self-winding extension cord

Fixtures
Added 84 commentary
Good day to all. I bring to your attention my version of manufacturing a fairly convenient self-reeling extension cord from the parts of a "killed" imported vacuum cleaner.




On the Internet there are many options for similar designs, which used plastic scraps from the body of the vacuum cleaner itself. The idea was to make a completely independent device case from materials and parts that were readily available and at hand.


In this design used:
- Details from the PHILIPS vacuum cleaner.
- Two twin sockets 16A.
- The handle is furniture.
- LDSP 16 mm thick.
- Edge tape.
- Plywood 6mm thick.
- Coupler furniture 5X50mm.
- Screws with a diameter of 3.5mm.
- Fasteners M3, M4.
- Colorless varnish XB-784.

Of the tools used:
- A drill on a rack.
- Jigsaw.
- The grinding machine.
- Iron.
- Screwdriver, wire cutters, etc.

Used coil parts with wire from a vacuum cleaner.



Parts cut from laminated chipboard 210x80x16mm - 2pcs, 168x80x16mm - 2pcs, with holes and a handle. The inner surface of the wire holes and buttons are varnished.



Parts cut out of plywood with dimensions of 210x200x6mm with holes. Plywood is sanded and varnished.



Assembled body frame. Details are connected by furniture ties 5x50mm.






The back panel of the housing with mounting screws M4 and M3.



Rear panel of the housing with a fixed coil base. The base is fixed with M4 screws.



Coil assembly, wire fastening.




The front panel of the housing with an additional screw clamp for the axis of the coil.



Front panel of the housing with installed base sockets. The base of the outlets is secured with M4 screws.




Installation of the main elements of the device in the housing.




The lock release button is made of an aluminum rod with a diameter of 17.5 mm. The restrictive washer is cut out of the felt-tip pen body and is simply very tightly mounted on the shaft.

Self-winding extension cord


Extension cord assembly. The heads of screws and screeds are sealed with self-adhesive furniture plugs.



The length of the fully unwound wire is 9M. Case size (without sockets and handles) 210x200x92mm. The total power of the connected load is up to 2.2 kW.

If you need additional information, write to the post office, I will try to be sure to answer.
Feedback, suggestions and comments are very welcome.

8
8
8.3
28
Added 84 commentary

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
84 commentary
Sirozh +1
Reply To quote A complaint
Cholovicha perukarnya and zhnocha perukarnya - hairdresser (male, female)
0
Reply To quote A complaint
Quote: Valery
I really want to look at a vacuum cleaner in 1949 ...
The comrade heard a jingle, but does not know where he is. ((
According to information BBC In 2008, the oldest operating vacuum cleaner failed, after it had been in operation for over 70 years.
By the way, in the USSR household vacuum cleaners began to be manufactured since 1952 (we are not talking about prototypes, it is clear that they appeared a little earlier)
0
Reply To quote A complaint
I agree that rewinding engines is a bad job. I never go for it. Although many trance wound, demagnetizing loops. One sold the demagnetization loop, so in gratitude, he presented a coil of enameled wire.
+3
Reply To quote A complaint
Quote: SergeyIL
A dead engine is no reason to throw the vacuum cleaner in the trash. Price question 5 bucks and the vacuum cleaner is like new!

Bearings changed ... Brushes changed ... But, here, rewind the burned motor ... thank you !!! Yes, and if you stupidly go and buy a lacquered wire of the desired cross section, then even it will cost about five bucks !!! But, after all, you also need brushes and new bearings !!! And varnish ... So, even if you have a drying oven at home - it’s all the same, you can’t enter five bucks to rewind a burned motor !!! And here, the new "mushroom" (the "motor-pump" block) costs somewhere around 20 of those same bucks ... I had "twenty" going in ...
Intrigued ... Oh, tell us how you can repair a burned-out vacuum cleaner motor in five bucks! .. Don't be the one-man! ))))
There are vacuum cleaners that are already 70 years old and they are still in working condition ..


Take a picture, please! I really want to look at a vacuum cleaner in 1949 ...
0
Reply To quote A complaint
Do you collect them? Then it's clear.
0
Reply To quote A complaint
If someone has already thrown out a vacuum cleaner? I do not need another vacuum cleaner, and an extension cord will come in handy.
0
Reply To quote A complaint
A dead engine is no reason to throw the vacuum cleaner in the trash. Issue price of 5 bucks and a vacuum cleaner like new!
0
Reply To quote A complaint
At me they do not break;) Or are quickly repaired ...
There are vacuum cleaners that are already 70 years old and they are still in working condition ...
Guest Cyril 0
Reply To quote A complaint
Well, they didn’t roll it into concrete, for reliability, so to speak, as you understand it, you need to yearn ... it’s very cumbersome and not convenient, it’s easier to buy ready-made if you really need to
+1
Reply To quote A complaint
Three divas were found in the land called Poskonii.
The first wonder is that the gate is golden.
Another wonder is that the temples are iron.
The third wonder is that the stoves are wooden.
Since then, the golden gate has been put on a gold coin, and gold has long been drunk.
Iron temples were reforged to armor and swords.
Only wood stoves remained.
They were plagued by laziness, since it is much easier to hammer a living tree than a wild stone.
Rare foreign travelers, spending the night in bad weather on the Poskonsky spiritual huts, noted a great miracle: the fire beats in a cramped stove, but does not cause any harm to it, although it does not give too much heat.
Sometimes, they asked the owner to sell a miracle oven for export; and they sold and exported, having previously marked the logs, as is done with huts and towers, wanting to put them in a new place.
But in new places, wooden stoves burned as nice, and therefore all travelers have since been previously considered liars, lies, inventors and bends.
Poskonichi were especially proud of this property of their furnaces. What, what, but they knew how to be proud.

M. Uspensky, "White horseradish in hemp field."
Author +1
Reply To quote A complaint
About the load, so everything is clear that the wire needs to be unwound is indicated even in the instructions for vacuum cleaners !!! As for the mechanism, this is the native mechanism with the native wire, but not left in the stubs of the housing from the vacuum cleaner but installed in an independent housing. It just has a locking mechanism and a spring for quickly winding the wire to the coil. On this - I used it then turned it off, clicked on the button, the wire itself reeled up, removed it on the shelf !!!
Guest Sergey Nikolaevich 0
Reply To quote A complaint
Why not use the assembly assembly together with the wire and plug? With the stop, everything is clear, but for a long time there are self-locking mechanisms, including on domestic models. At full load, you still have to unwind the wire completely and without turns (electrical - fire safety). And so I liked the idea, especially for giving and it is convenient to store.
0
Reply To quote A complaint
And the radio rolls! And the receivers ... Even my childhood refrigerator was wooden))))
0
Reply To quote A complaint
Wow !!! The radars "left", so the layman quickly fussed over and came up with a new explanation, according to the existing realities! ")))) _
0
Reply To quote A complaint
Who remembers, at one time, carriers drove compact discs, it was believed that the discs interrupted the operation of radars and that speed could be exceeded

And here it is. One hung something on the car. They can’t explain why .... So - it saves from the radar! ))))) There was a brake in the headlights. They said that from fogging, but many also attributed the property of a radar detector to her! Then - CDs ....
+2
Reply To quote A complaint
where you can buy an officially industrial search appliance
What kind of search appliance is it? and
you do not earn money on it
- this is not from the field of use of the device, but from the field of illegal business activities
+2
Reply To quote A complaint
Count it, there used to be morons, they stuffed TVs in a wooden case! There are many kilovolts! Idiots! yahoo
0
Reply To quote A complaint
Bullshit, photofixing discs are not a hindrance! Is that the numbers they slam. xaxa
It’s impossible to carry a portable electronic warfare station with you, but it's a pity.
0
Reply To quote A complaint
R555
drives disrupt radar
Without pretending to be true, but I heard that discs, like reflectors, interfere with photo-recording of violations. scratch
0
Reply To quote A complaint
Actually, the law is a tricky thing. Take, for example, radar detectors. How many times they are trying to ban them and nothing. Legally sell video recorders with radar detection. By the way, I remembered a joke. Who remembers, at one time, carriers drove compact discs, it was believed that the discs interrupted the operation of radars and that speed could be exceeded. So, I just saw the tractor driver hooked on the tractor, if this tractor develops speed, then 5 km / h, maximum.
0
Reply To quote A complaint
I agree with you. If you get bogged down with such a device, you can say that you did it for your needs, you can’t earn money on it. Recently, a friend asked me where you can buy an officially manufactured search engine. I grieved him a little, without a license for this type of activity they will not sell it now, if only from under the floor.
0
Reply To quote A complaint
Moreover, for the violation of this law No. 99-ФЗ with regard to the use of detection devices for information retrieval devices, no criminal prosecution is provided, the maximum is an administrative penalty.
+1
Reply To quote A complaint
R555
Illegal use of means for detecting information-picking devices ... if you get pierced, you’ll sit down
Our legislation allows information owners to independently, using search equipment, without obtaining a license, identify such STS to ensure their own information security. (Federal Law "On the Licensing of Certain Types of Activities" No. 99-ФЗ dated 05/04/2011, Clause 3)
boss
0
Reply To quote A complaint
Quote: pogranec
what article is it?

The right question! The comrade heard a jingle, but does not know where he is. ((
+1
Reply To quote A complaint
Illegal use of detection tools for information retrieval devices.
you confuse something
0
Reply To quote A complaint
Illegal use of detection tools for information retrieval devices. It is possible only to the KGB and FSB officers, and if you get pierced, you can sit down. When they inspect the room, they ask everyone to leave. They put their devices.
+1
Reply To quote A complaint
Up to 3 incarcerations can be given for a bug search device.
- What is this article?
0
Reply To quote A complaint
I decided to change the title of the second authoring.
Up to 3 incarcerations can be given for a bug search device.
Advise how to name, say, the radio interference indicator.
0
Reply To quote A complaint
For the sake of likes, I do not work. Although out of respect, I can.
0
Reply To quote A complaint
It doesn’t matter if they are twisted or not. The main thing is that they pass in close proximity to each other, so the total inductance when turned on in the extension cord mode will be close to zero (in the ideal case, equal to it). Twisting the wires reduces radiation in generator mode and differential interference in receiver mode.
Guest Vita 0
Reply To quote A complaint
Physics: will there be a field? Requirement: Underlay fireproof material. For experiments, an automaton would also not hurt.
+1
Reply To quote A complaint
Met and not. Who understands that the RF goes along the outer layer of the conductor, but in the fig they make the mounting wire clearly from iron. And the legs of transistors and other components. I have at hand a wire for homemade products, seemingly iron and magnetized, soldered easily, almost without rosin. However, I came across television cables that I could not solder a braid even with an active flux. Under paradise and all.
+1
Reply To quote A complaint
Valery
Chinese wires have not yet met we have
And I we have met when I first encountered, ofigel! Something like a thin PVA, the veins are very tiny and springy, like copper in color, scratched with a knife - the color is steel, and even magnetized! scratch
+1
Reply To quote A complaint
So, if a monograde:


And so - if flexible:
+1
Reply To quote A complaint
Quote: Korolev
Firstly, the quality of the Chinese “copper” leaves much to be desired, secondly, it has repeatedly run into sections less than indicated, thirdly, simply because of the greater mechanical strength of the insulation, and the price difference is not so great.
Chinese wires have not yet met with us. Roofing felts do not pass certification, roofing felts, another measure to protect domestic producers (we have such crazy measures. “Buy Belarus!”, As we jokingly call this phenomenon - some imposed taxes and duties are imposed on impotent analogues so that they are equal in price with Belarusians, especially if they lose in quality - such as to take their own!. So they stop supplying them!
I try to take not "teushny", but "guest" cables. Everything is normal in them.
And for the "shurik" thicker - bad! First of all, lightness is needed!
+2
Reply To quote A complaint
Who did so put Valeria Like, see how many of us-))))

Yes, everyone did it!)))) Still, the "right" only in conversation!)))))
+3
Reply To quote A complaint
Guest Alexander
Either cunt or it’s not true.
1. You are badly brought up!
2. You do not know how to read:
Flew down ..., clicked introductory machinegrabbed a hose
! fool
+2
Reply To quote A complaint
"Who did so put Valery like, let's see how many of us-))))" survived
Guest Alexander -3
Reply To quote A complaint
Chet, I did not understand..... the machine did not work ... So everything is energized? But how did you put out the water? Either cunt or it’s not true.
+3
Reply To quote A complaint
two wires to the outlet!
Who did so put Valeria Like, see how many of us-))))
+1
Reply To quote A complaint
I also think to do this ... but, purely because there are several "vacuum-cleaned corpses" in the basement ....)))
And I have a lot of extension cords. 50,40,30,20-meter - on ordinary reels. Short (15.10.5 meters) - wound on welding coils.
Guest Alex +1
Reply To quote A complaint
Of course, a lot of things were wound for the sake of 9-8 meters, the heat transfer raises questions about how the decor will certainly pull, but in practice .... 9-8 meters can be done without stray even in an apartment. I have a 40 meter extension cord on a simple reel and welding and other tools, and if you did not completely unwind it, you can put your hand into the wires at any time to determine it is critical not critical.
Author 0
Reply To quote A complaint
That's just the engineers of "Philips" probably stupid you !!!
+5
Reply To quote A complaint
there are extension cords with a flat plug! xaxa
We don’t have it yet! For example, two wires to an outlet!))))) I used it myself. Even has already developed a form of bending the ends, so that the contact is normal, and does not jump out from a slight jerk.))))
+1
Reply To quote A complaint
And at the end of the 80s they joked that in Kiev a large number of stores of the French company Vzhenyma, which sells empty shelves, appeared. )))))))
0
Reply To quote A complaint
And who is talking about ballscrew? Do not distort, please. Extension cords are made of PVA or the like. And in it the wires are twisted, at least two of them, at least three of them.
+2
Reply To quote A complaint
Valery
A pin (“dad”) sticks out of the sockets with the ground.
And we have for these perverts extension cords with a flat plug! xaxa
0
Reply To quote A complaint
Valery
... chicken is not a bird, Zaporozhets is not a car
In 1982, I first came to Kiev, I read the sign: "Zhinyachya perukarnya" and, next to: "Cholovich perukarnya." I can’t vouch for spelling, but in fact I really liked it then! good
0
Reply To quote A complaint
Valery
ShVVP 2-0.5. Enough for the "shurik"
For some time now I began to acquire cable products of obviously larger cross-section than necessary. Firstly, the quality of the Chinese “copper” leaves much to be desired, secondly, it has repeatedly run into sections less than indicated, thirdly, simply because of the greater mechanical strength of the insulation, and the price difference is not so great. smile
+4
Reply To quote A complaint
And when I was building a house in the country, I almost burned it!)))). The construction was at the stage when the wiring was not yet. In the box on the ground floor I put, apart from the opening, one “sixteen” and next to it is a socket on a DIN rail. With it, the strument was powered.
Then I worked on the second floor with a screwdriver (for 220). He made a special for him a lightweight extension cord for 40 meters from ballscrew 2-0.5. Enough for the "shurik")))). He worked on an aluminum stepladder. One. In order not to jump, he took two ladders and simply switched from one to the other, and rearranged the first (it’s easy). So he put his “foot” directly on the wire! ... And then he climbed onto it and “froze” ... The resistance of forty meters of a thin cable (80 wires) was enough to prevent the machine (16) from working! While I was watching from above why the shurik stopped twisting and pulled the plug, the cable, starting from the “foot” and right up to the shield, suddenly flared up over the entire length - all forty meters! And he was lying on the wooden draft floor of the second floor! And there - and sawdust and shavings! Fortunately, from below I had a hose with water !!! He flew down (along the already burning wooden staircase, along which the cable descended))), clicked on the introductory machine, grabbed the hose and ran with it along the "brook of fire" along the cable! Just climbed to the second floor - op-pa !! The water is over! (Hydrophor gave everything that was in the accumulator!). Running back, knocked out the “sixteen”, cut the introductory - and again upstairs! ...
Put out !!! But for a long time then my hands were trembling))))

DIY categories

We advise you to read:

Hand it for the smartphone ...