In this article, we will look at how the Master made the mailbox look like a cartridge.
Tools and materials:
-Exhaust pipe;
- Plugs;
- Loops;
-Paint;
-Silicone;
-Mounting foam;
-Scissors for metal;
-Drill;
-Fasteners;
- Pliers;
Step One: Stubs
First, the master cuts the pipe to the length he needs. Then the end of the pipe bends slightly, makes a wave. This operation will allow you to tightly install the plugs on the ends of the pipe. Installs one plug and seals the connection.
Step Two: Dummy Door
Divide the second plug with a marker into two unequal parts. Marks the installation location of the hinge and drills the mounting holes. Cuts the plug into two parts without touching the rim. Glues a smaller part to the rim with sealant.
Secured the movable part of the plug. Installed in the center of the cartridge. Painted.
Step Three: Painting
Set the checkbox. The checkbox indicates the presence of correspondence in the box. Paints a pipe with a fixed cap in red.
Step Four: Installation
Now it remains to fix the bottom mount and set the box in a regular place.
