An interesting lamp was invented and made by the Master. For its manufacture, he used the following
Tools and materials:
-Eurban;
-Plastic eggs;
-Wire;
-Acrylic white paint;
-Tube plastic;
-Drill;
-The wire;
-Soldering iron;
-Transparent plastic sheet;
-Yellow cellophane;
Step one: mushroom caps
Mushroom caps are made from decorative plastic eggs. The master cuts four eggs, for the hats you need the blunt sides of the eggs. Then you need to clean with sandpaper.
Step Two: Leg
The leg is made of a plastic tube. To connect the legs and hats, a circle is cut from a plastic sheet. The size of the circle should be inserted inside the cap. A hole is cut out in the center of the circle. A tube is inserted into the hole and glued.
Step Three: LED
The wire is drawn through the stem and soldered to the LED.
Step Four: Mushroom Harvest
You need to install the wire inside the tube. The wire allows you to change the position of the stem.
Now you can connect the stem and the hat.
The stalk is painted with white acrylic paint.
A circle of yellow cellophane is glued under the hat.
Step Five: The Base
The base of the lamp is a block of wood. In it, the master drills a hole.
Stretches the stems into the holes and secures them.
Now it remains to connect the wires to the power supply and you're done.
The whole process of manufacturing such a lamp can be seen in the video.