» Knives and swords »Massive survivalist knife from spring

Massive Spring Survival Knife



This year, America has frozen, fires are raging all over the world, wars are going on and volcanoes are erupting, all this can speak of the end of the world, Jehovah's Witnesses say. Believe them or not, everyone decides, but to prepare for such events will not be superfluous. So, one author decided to close up a knife to fight off enemies, get food and build huts. He made a knife for automobile springs, homemade You can not only cut, but also chop thick branches or even sharpen logs. Spring steel lends itself perfectly to hardening, and although it cannot be sharpened to the state of a razor, steel will cope perfectly with the functions of a brutal knife. So if you are still interested in the project, I propose to study it in more detail!

Materials and tools used by the author:

Material List:
- car spring;
- a tree for overlays;
- epoxy adhesive;
- brass rods for pins;
- oil for wood.

Tool List:
- blacksmith furnace and forging tools;
- grinding stones;
- a pencil;
- grinder;
- brush and grinding nozzles for grinders;
- tape cutting machine;
- drilling machine.

The process of making a knife:

Step one. Source material preparation
The source material is the automobile spring, for a start it needs to be leveled. To do this, steel must either be annealed, or it can be leveled directly to hot. After that, draw the profile of the blade that you want to get on the plate, and you can start cutting. For cutting, the author used a grinder. Of course, the spring steel is quite thick and cutting with a grinder can be quite a tedious task, but in general the task is quite feasible.






Step Two Forging
The author made easy forging of the blade, thanks to forging the steel will become more durable and it will be better suited for the manufacture of a knife. By forging it is possible to form slopes, as a result, much less force will be required for grinding work. Also, if desired, you can form a decorative pattern with a hammer with a rounded tip. After forging, we normalize the steel and leave to cool.




Step Three Coarse grinding
After forging, we eliminate all sins by grinding, here we need a grinder with grinding nozzles. As for the decorative pattern, it can be treated with a brush nozzle.




Step Four Quenching
We temper steel so that the blade is strong and the blade does not blunt for a long time. We heat the blade to a non-magnetic state and immerse it in water, but it is better to use oil. If hardening is successful, the blade will begin to ring, and the metal will not be taken with a file. The author did not release steel, but it is advisable to do so so that the steel is not brittle.


Step Five Cleaning and polishing
After hardening, we clean the blade from scale, then a brush nozzle on the grinder or drill will help us. Then you can polish the slopes to a mirror state.



Step Six Handle
We assemble the handle for the knife, cut the lining out of wood or use boards of suitable thickness. We drill holes for the pins and glue the pads on the handle using epoxy glue. At the end, we attach the desired profile of the handle using a grinder with a petal nozzle and carefully grind it with an emery cloth. To emphasize the beauty of wood and protect it from water, we impregnate the tree with oil.









Seventh step. Sharpening
Sharpen the knife, if the steel is well hardened and suitable in quality, it can be sharpened to a razor condition. For sharpening, the author uses a variety of whetstones with different grit. So that the stones are sharpened well, they need to be watered. The final sharpening of the knife was made with a stone with a grit of 8000.

That's all, the knives are ready, their author made two at once. Such a hatchet knife perfectly cuts wood due to its large mass and strength. This is the end of the project, I hope you liked the homemade work, and you found useful thoughts for yourself. Good luck and creative inspiration, if you decide to repeat this. Do not forget to share your ideas and homemade things with us!







6.3
7.3
7

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
8 comments
RANDOMLY READING NON-INDIVIDUAL
Hello! I’ve been to the United States, there are in every household store (large), machetes of various sizes and without the threat of a prison are sold ... but that’s not the point ... knives like us here familiarize us, they are primarily used for chopping actions and movements! and they showed us the form for bread cutting movements! in order to work with chopping movements and use to the maximum such large knives, it is necessary to drive the blade to the handle as much as possible, and expand to the end of the blade as much as possible! with this shape, the knife, with the same weight as this one, will be light, but will have the maximum chopping effect for a given weight !!! and here is some kind of craft, perhaps well-made, but not functional! yes, you can cut bread with it, cut meat ... but you can also do this with a store knife with a long blade of 10 - 15 centimeters ... no offense, just my opinion ... based on experience! we don’t have sugarcane, but with this steep knife it will be difficult to chop cabbage even !!!
Guest ivan ivanov
and where this chipmunk was going to survive. in a pub or on a baseball field.
super. I really liked.
lelik
the hall. op. still need to recognize. this campaign will not hold out. an ax is like an ax.
Guest Peter
Spring - 65g, of course an interesting piece of iron and strong, viscous. But for a knife it is not a good idea to take it, it sits very quickly, it deforms.Even a crane rail (k63) will be more efficient and reliable, as well as a bearing (wx15 really should be taken with a margin when forging there will be a lot of marriage) or a rasp (y7-9). Of course, the best option would be (h12mf) you can find it in various dies and molds imported analog d2.
Nemo Ivanoff
This is anything but the survivalist’s knife.
Spring steel is something like 65G or 60S2A, than he drills it after hardening at HRC for 50 scratch
Jehovah witnesses.

Were they witnesses at his wedding? ... And when did he get married? ))))

We advise you to read:

Hand it for the smartphone ...