In this article, the author of the Measured Workshop YouTube channel tells you how to make a simple organizer. And since the video was made on April 1, the use of sandpaper is pure humor.
Materials
- Sandpaper
- sheet plywood
- Wooden dowels
- Polyurethane varnish for wood
- PVA glue.
Instruments, used by the author.
- Scissors, handle
- A circular saw
-, wood drills
- Conductor for drilling dowel holes.
Manufacturing process.
So, the author prepared a sheet of plywood.
Then he cut the 80th grit sandpaper into narrow strips.
And he began to cut the sheet into strips. Says it turns out slowly.
As I said, he cut the sheets into strips with a circular saw. Then cut one sheet into squares.
Some of the squares will be used to make shelves, and they should have protrusions on the back.
This action is also performed on the machine.
At the front of the shelves should be protrusions for lifting them, and indicators of gritnost.
It seems to me that the milling cutter, who worked with emphasis, was here.
It's really fun to cut the 20th plywood with sandpaper! I would have taken the 40th!
In general, after remarkable efforts, the blanks for the box and the shelf are ready.
In the side walls you need to make grooves.
If it were not for the circular that did this in several passes, with a shift of emphasis, then the author would have suffered longer than the Egyptians with the pyramids.
Do you think this can be done holes for dowels?
This type of drill this happened. Well, the fire ...
In short, the holes for dowels are made using an end mill, or a screwdriver with a special conductor.
Okay, okay, let the dowels be cut with sandpaper, let's see if he will cheat or not?
Taki deceived, without a Japanese saw, it certainly could not have done.
Fuh, well, at least the dowels could be glued into the back wall without sandpaper.
In short, and here without it was the assembly and gluing of the body. I would at least cut the strips and wrap them instead of a tape clamp.
Excess dowels are skinned.
Okay, you can cover the surface with polyurethane varnish when using 220-ki.
The final touch, applying the values of grit. And those upside down did. On this bullying ended, and he was ready.
You can collect. Shelves are placed in their places in ascending order.
Now raising the desired shelf, you can put sandpaper sheets there.
Thanks to the author for a funny idea, and useful device for the workshop!
All good mood, good luck, and interesting ideas!
Author video can be found here. They can surprise inexperienced acquaintances, or make old masters laugh!