An interesting ceiling chandelier was invented and made by the Master. The chandelier has 12 beams. There are three waves on each ray.
So, for the manufacture of such a ceiling lamp, the master used the following
Tools and materials:
-LED Strip Light;
-Boards;
-Paint;
-Fasteners;
- Electric jigsaw;
-Sandpaper;
-Drill;
-Soldering accessories;
-Wire;
-Glue gun;
Step One: Rays
As already mentioned, the lamp has 12 beams. For their identical production, the master makes a template. Having taken one of the boards, the master draws a beam of three waves on it. Then cuts out the beam.
Then, according to the pattern, cuts out 11 more rays.
Step Two: Grinding
The master polishes the resulting workpiece. The ends of the rays are rounded.
Step Three: Painting
Further, the master primers and stains the rays.
Step Four: Installation
Now you can fix the beams on the ceiling by placing the mounting box in the center.
Step Five: Soldering
In total, about 30 meters of LED strip were spent on the lamp. RGB tape addressable. The wizard prepares tapes for installation on the rays. Solders connections, connects, checks operation.
Step Six: Decorative Cover
Cut and color the overlay. It will be mounted in the center of the lamp and close located below it. electronics.
Seventh step: tape installation
Now you need to connect power to the tape power supplies and secure them.
It remains to stick the LED strip to the beams.
Here is such an unusual lamp made by the master.