» Joiner »Bench by the bed

Bed Bench


Greetings to all readers and the inhabitants of our sites. An excellent alternative to a bedside table can be an original table. After all, it is possible to put all the same objects on it, and if you wish, install it not only by the bed, but also in any other convenient place in the apartment or house. Therefore, today I want to share one of the ways to make such an item of furniture. I found him on the expanses of the World Wide Web.
In order to make a table, the author used trimmed boards. First cut them to one size. Since the boards were thin, and I wanted to make the table durable, the author glued them in pairs to the Joiner PVA. And until the glue seized, he fixed the blanks with clamps. I processed the resulting parts on all faces on the machine so that they were perfectly even. Then the author glued the blanks into the shields, for this he used all the joiner's PVA and locksmith clamps too.







Finished shield must be properly sanded and rounded at their edges. Then the author cut the shields into the necessary components of the table. I cut out grooves in certain places. He assembled the table, having previously missed the joints with glue, and fixed everything with clamps.






At the finish stage, the author finished the finished product with varnish.


Thank you and good luck to everyone!
7.3
6.3
5

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose

We advise you to read:

Hand it for the smartphone ...