When assembling wooden structures, sometimes you need to hide the screw head. There are various ways to do this, sticker sticker, install plastic plugs, putty, etc. The wizard offers another way.
Of the materials you will need: carpentry glue, a wooden blank, a screw, a coating.
Of the tools you need: a chisel, a hammer, a drill, a clamp, a grinder, a brush.
Place the screw in place with water. This technique will prevent the wood from breaking off. Then the master chisel cuts off part of the wood, but only from one end.
Then the mounting hole is drilled and countersinked. A screw is screwed into the hole. The screw head must be recessed.
Next, you need to apply glue, stick masking tape and press with a clamp.
Then the place of gluing is ground and the part can be coated with a protective or decorative composition.
Here is such a cunning / simple advice, I hope he helps anyone.