Pens for writing pens have long been sold. You make the case yourself, and the cap, clip, mechanical device from the set. As a rule, the case is made either of wood, or they combine wood, paper, plastic, etc., with epoxy.
The master decided to make an unusual case and use instant noodles as a filler.
Tools and materials:
-Pack of instant noodles;
-Hammer;
-The form;
Epoxy resin;
-Disposable cups;
-Lathe;
-Cutters;
-Dyes;
-Autoclave;
-Miter saw;
-Drill;
-Accessories for handles;
-Sandpaper;
-Glue;
-Retail;
-Press;
Step One: Fill
First, the master crushed a whole piece of noodles into smaller fractions.
Put the noodles in the mold. For the manufacture of the handle, one blank is enough, but to save time and resin, the master fills all three compartments of the mold.
Now you need to mix the epoxy resin with the hardener, add the pigment and pour the mixture into the mold.
Puts the mold in an autoclave until rejected.
Step Two: Trimming, Drilling
Then the master cuts the workpiece to the desired length.
In the center of the workpiece drills a hole for the rod and for the installation of equipment.
Step Three: Turning
Sets the workpiece in a lathe and grinds it, giving it the desired shape.
Step Four: Sanding and Coating
Sanding with sandpaper. Then it applies 10 layers of Starbond Ca Thin glue to the surface.
Step Five: Build
The housing is ready and now it remains to press in the remaining parts and assemble the handle.
Here's a pen with noodles.
The whole process of making a pen can be seen in the video.