I welcome all fans to craft, I propose to consider instructions for the manufacture of a portable air conditioner do it yourself. The author made the case out of plumbing parts, and the motors were used very powerful for aircraft models. The source of the cold is ice, which the author loads into the casing. The design flaw is that the air conditioner blows a lot of water out of itself, which is unacceptable. But with certain modifications, you can make sure that the water remains inside. Air conditioning can be powered by a battery, although the motors used consume a lot of current. If the project interests you, I propose to study it in more detail!
Materials and tools used by the author:
Material List:
- two motors 4500kv;
- ESC at 40A;
- speed controller;
- lithium battery (in our case, 2600 mAh);
- plumbing parts made of PVC (see photo);
- nylon ties.
Tool List:
- a hacksaw for metal;
- drill;
- glue gun.
Manufacturing process homemade:
Step one. Installation of motors
First, the author decided to install the engines. It turned out to be quite simple to install them, their cases coincide with the inner diameter of the sanitary parts in the form of an angular connection. For fixing the author used hot glue.
Step Two Body assembly
We assemble the case, all the necessary details are in the photo, everything is assembled very simply and quickly. Those places where there may be water can be glued as a seal. There is no need to glue the rear blow pipes, the point is that they rotate in the right direction.
Step Three Connect and start
We connect the necessary electronics to the motors and install a lithium battery. The author fixed all the nodes with nylon ties. Propellers must blow air into the body. As an experiment, the author threw pieces of polystyrene into the body and turned on the propellers, they flew out of the body at high speed.
You can test it, put ice in the neck, put a cap and turn on the propellers. At maximum power, the air conditioner will blow out water, and at low speeds it will be able to work without problems.Of course, as improvements, you need to make an outflow for water or remake the air conditioner to evaporative.
The project is completed on this, I hope you liked the homemade work, and you found useful thoughts. Good luck and creative inspiration, if you decide to repeat this. Do not forget to share your ideas and homemade things with us!