Once the author of Instructables under the nickname stevenarango not only feather, but other drills were stored like this:
At first it suited him, but then he realized that he needed to take at least a small step towards convenience. And since the master uses feather drills more often than others, he started with them. They are mainly used in woodworking, and the organizer is also made by its means.
So, the master makes for homemade the following details (definitely, some sizes are given incorrectly):
- bar 38x330x12 mm in size - drill holder
- 6 mm thick MDF plate with dimensions 225x228 mm - vertical base
- a 3 mm thick plywood plate with dimensions of 50x330 mm - an intermediate part between the drill holder and the vertical base
- same plate, but made of plywood 6 mm thick - stand
- wooden plank with a section of 6x3 mm, a length of 330 mm
The master drills two rows of holes in the holder, the distance between them in each row is 38 mm, then glues it to an intermediate part 6 mm thick:
Marks a large plate, glues to it the result of connecting the two previous parts:
Adds stand:
And to her - the bar:
Further, the master recommends cleaning and waxing the tools (is he sure that he is not an organizer?).
Despite the fact that the original instruction was written not without minor flaws, the design itself does not fit the definition of bullshit, and it can be recommended to readers for repetition do it yourself. After minor refinement, consisting mainly of size adjustment, it is also suitable for storing other tools.