I have already translated an article on how to make a sculpture in the form of a robot from what anti-plushkins call rubbish. And the author of Instructables under the nickname depsygner decided to make do it yourself from the same material a small sculpture in the form of a motorcycle.
The biggest details homemade are the nuts with which the master begins. Places them on one line, glues pieces of steel wire to them, and something motorcycle-like is already visible:
Pastes a transformer on a ferrite ring inside the resulting frame:
The wheel becomes a wheel from a toy car, the seat - a plate and a rectangular parallelepiped, it is not clear from what, the back - a capacitor:
The headlight master makes a metal cylinder, and the rear wing - the top cover of the lighter:
The master turns metal pins into fashionable silencers:
Glue a small piece of steel wire across from below, and a spring along:
From the side opposite the silencers - a resistor and a piece of mesh:
To the rear wing - diode:
And to the steering wheel - resistors, which presses with pieces of erasers until the glue hardens:
A small spiral is glued on the side of the silencers, and the mini-sculpture is ready:
Let's look at it from different angles:
Is it possible to convince the anti-plushins with such an art? Not. But it’s for the better. Plyushkin will be able to collect such sculptures from.