The author of Instructables under the nickname AverageJoesJoinery designed a simple compact laptop table in SketchUp, which he then made do it yourselfusing a limited set of tools.
The wizard puts out a sketch of all the details homemade with dimensions:
Plywood is everywhere the same thickness - 18 mm. Next, the wizard shows three-dimensional renders, which show how to connect everything:
From theory, the master proceeds to practice - begins to manufacture parts:
Each of the legs of the table the master glues their two parts, differing in height. Thanks to this, a sharp difference in thickness from 36 to 18 mm, turned inward, is obtained from above, which facilitates the alignment of the legs during their further installation. The putty masters the plywood defects with putty; the finished legs are primed and stained.
Collects a box:
Adds door hinges to make the countertop rise:
It masks the heads of hardware with an epoxy putty:
Marks the bottom of the box (this step is optional):
Glues the legs, orienting them according to the thickness differences mentioned above. Covers the finished table with polyurethane varnish. By lifting the countertop, you can open the compartment for storing a laptop and accessories for it when they are not in use.
Such a master came out with a compact and easy-to-make laptop table. You can use it with a tablet, supplemented with a stand, a USB OTG adapter and a keyboard.