» Joiner »Device" Oblomov Assistant "

The Oblomov Assistant device



"The one who invented the sofa did not invent anything else." So the proverb says, but in reality the developers homemade constantly coming up fixtures, allowing you to make your stay on the couch or bed even more comfortable. For example, the author of Instructables under the nickname ehandyman was tired of holding a tablet in his hands while watching a video on it. And figured out what to do.

The following photo is at the same time a design sketch with all dimensions. What is labeled 2x4 inches is a wooden profile with a cross section of approximately 50x100 mm. Accordingly, 1x4 - this is about 25x100 mm 25 inches - this is 635 mm, you can round to 630 or 640. 8 inches - 203.2 mm, you can round to 200. Well, the angles do not need translation, the degrees are the same everywhere.



A metal corner connecting parts from a wooden profile - of arbitrary sizes, from those available on the nearest construction market. There are only two requirements for it: to fit and withstand. And you also need a plate with tablet mounts. This part of the structure is shown on the reverse side below. The plate is cut out of cellular polycarbonate, holes are made in it, through which elastic laces are passed. To that wooden part, the length of which is 200 mm, it is attached with self-tapping screws and cable ties.

The Oblomov Assistant device



The method of its fastening is shown in more detail below. 9.5 x 7.5 inches is approximately 240 x 190 mm. Of course, these sizes should be adapted to your existing tablet. 0.75 inches from the end is about 20 mm. Corners rounded by 2 inches are about 50 mm.



Now consider the method of attaching the structure to the head of the bed. Just screw it to it with screws - it is possible, but the design will turn out to be fixed. But what if you decide to sell the headboard? On it will remain holes from the screws. Therefore, the master makes the design quick-detachable as shown below.



The wizard specifically installs the mount on the side to show how it holds. So it should be installed approximately in the middle.



Well, when the device is not used, you can put it off like this:



And this is right, because Oblomov can be cosplayed, but in moderation.
4
4
1

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose

We advise you to read:

Hand it for the smartphone ...