After gluing the first panel, stick the second lap to exactly match the pattern, smooth and roll with a roller. After this, non-glued edges are turned off, a metal strip is laid under them along the entire height of the joint underneath, and both edges are cut along the ruler at once. Having taken out the rail, glue the edges of the wallpaper and roll it with a roller.
So that when deploying the front layer of linkrust does not break, it is soaked in hot water. Sliced panels are laid face down and loaded. Withstand up to a day.
Applicable adhesive: “Bustilate”, PVA and other synthetic adhesives.