This mirror, several years after purchase, stood by the master idle. Once again having encountered him in the pantry, he decided to make a dressing table and install this mirror in him.
Tools and materials:
- Boards made of walnut;
-Plywood;
-Mirror;
- Clamps;
-Fasteners;
- corners;
-Marker;
-Gon;
-Circular Saw;
-A circular saw;
Milling cutter;
- Joiner's glue;
- mallet;
- dowels;
-A screwdriver;
Step One: Material Preparation
First, the master marks and performs the sawing of the material.
It glues slats to the ends of the panels.
Step Two: Corner Shelf
Then the master makes a corner shelf. To connect parts at this angle, the master adjusts the saw blade to an angle of 67.5 degrees.
Step Three: Lower and Upper Shelves
The ends of the panels for assembling the upper left and lower shelves are cut at an angle of 45 degrees.
Step Four: Grooves
To install the partitions, the master marks out and cuts out the grooves with the milling cutter.
Step Five: Build
Then the wizard begins to assemble the shelves. Glues the vertical stand.
Cut grooves and install horizontal panel.
Sets the rest of the shelf details. Before the glue dries, it fixes the parts with clamps.
Step Six: Feet
Next, the master begins to make legs. As can be seen from the photo of the finished product, the left and right knives have different sizes. The master decided to make the left short leg first, and then measure and make the right one.
The leg will be made of three parts, actually two legs and a base. The master cuts two legs.
Cuts the cross bar. Cut out two grooves in it for installation of legs.
Drill mounting holes.
Glues the legs to the base. Sets dowels.
Screws the leg to the dressing table.
Next, the master measures the length of the long leg. The main thing here is that the two legs are on the same level.
The long leg is made in the same design as the short one.
Secures the leg.
Seventh step: frame
Now you need to make a frame for installing the mirror. From the board, the master cuts planks for the frame.
Cuts them at an angle of 45 degrees.
Assembles a frame and sets, on glue, a mirror.
A frame with a mirror is fixed to the shelf with the help of corners.
All is ready.The entire process of manufacturing and assembling the dressing table can be seen in the video.