If you have a broken handle on the refrigerator - do not rush to buy a new one, try to make it. And how, the Master will tell us about this.
Tools and materials:
-Roulette;
-Pencil;
-Hammer;
-USHM;
- Hacksaw for metal;
-Wood oil;
Sanding paper
-Grinder;
-Key;
-Screwdriver;
-Aluminum billet 5x30 mm;
-Fasteners;
-Wood;
-Vise;
Step One: Making a Pen
First, the master measures the broken handle, dimensions, mounting holes, bending line.
It transfers the dimensions to the aluminum billet. Drills holes at the top of the handle.
Bends the workpiece, gives the desired shape. The excess part is cut off.
Drills the bottom mounting holes.
Grinds the handle, rounds corners.
Step two: pad
Then the master makes two lining of wood. Drills mounting holes, cuts to size.
Grinds.
Step Three: Handle Assembly
In the handle, drills holes for mounting the lining.
Covers the handle with varnish, and the lining with oil.
Set the pad.
Step Four: Installation
Now it remains to install the handle on the refrigerator door.
All is ready.