In this article we will make a wonderful children's toy "Helicopter from improvised means"
For this we need:
- A line of 15 centimeters.
-Pencil.
Self-tapping screw.
- Hacksaw for metal or a piece of canvas.
-Small drill.
-Super glue.
-Lighter
Step 1) First, make a small hole at the 7.5 cm mark (middle) of the ruler with a screwdriver or a heated nail, then make cuts on both sides at the 10 and 5 cm marks, half a centimeter deep.
Step 2) Using a lighter, heat up the incised parts and form a blade, bending them in opposite directions.
Be sure to make sure that the bends on both sides beat the same.
Step 3) We take a pencil. In the upper part we make a hole, thereby preventing it from cracking when screwing the screw.
Step 4) Install the blade so that the right side looks up and the left side down. We do not screw the screw to the end, we drop a couple of drops of glue, to prevent the blade from turning with a pencil, we twist the screw to the end.
That's all, the toy is ready!
It starts very simply, in our palms with a sharp movement we turn the pencil and it TAKES OFF!