Not always any fish can be caught. There are species of fish that are difficult even to the most experienced fisherman. Here you can’t do with fishing rod alone. But the more difficult it is to get the desired fish, the more interesting the fishing process becomes.
Where the fishing rod no longer helps, there is no way to do without bait. For example, a fish such as bream is very cunning. She is very cautious in her actions and rarely falls into the hands of a fisherman. And so it remains such a desirable trophy. This fish is difficult to catch without it, and if fishing occurs on the river with the course, then there is no way to do without a feeder.
Each real fisherman can make such feeders independently without leaving the house. This will turn out real manual work, and at the same time save a lot of money. Cause to do something do it yourself cheaper than buying in a store, and more reliable.
You can make such a feeder at home in just four steps.
For the feeder you will need:
- Scissors for cutting metal, or grinder
- Metal sheet (perforated)
- Pliers and steel wire (wire diameter approx. 2 mm)
- Lead sheet
First you need to cut a piece of perforated metal and fold it into a triangle. To connect the two parts of such a figure, you can use wire mounting or soldering. This will be the frame of the feeder - the "cage".
Next, you need to cut a strip from a sheet of lead. The length of the strip is 3 cm more than the size of the prepared frame. Using pliers made of wire, you need to make a mounting frame.
And now the last step - all the finished parts need to be connected together. A strip of lead sheet must be attached to the cage, bending the ends. And the mounting frame is fixed on the front of the feeder.
That's it. The feeding trough for fishing is ready.
If you wish, you can varnish the finished product. When choosing the size of the feeder, consider that it should be roomy - for example, bream overfeeding in the river is almost impossible.