DIY gas burner, temperature up to 1000 degrees!

Homemade gas burner, the burning temperature of which can reach up to 1000 degrees!





To make a homemade gas burner, we need the following elements:
- Medical needle from a syringe
- Needle for pumping up soccer balls
- Two droppers

First, take a thick needle and make a small hole in the middle of its length as shown in the photo:


The joint must be wrapped with a thin, copper wire:

and tin:


Now we put dropper hoses on both needles. It should look something like this:


Gas must pass through a thick needle. To supply it, we connect a gas spray to the tube:


We hook the second hose to the compressor to supply compressed air. If there is no compressor, then you can create pressure inside a regular plastic bottle using a hand pump.
To do this, make a hole in the bottle cap and insert the front of the syringe there (removing the piston). As a result, we will succeed:

We also make a hole in the back of the bottle and insert a tube into it. To seal the joints, carefully glue, then we can test our "compressor":


If the air supply is normal, then everything is ready for testing the burner itself.