[media = http: //www.youtube.com/watch? v = QmGetP5pZxM]
To make a mini-shocker, we need:
- Electric lighter
- paper clip
- glue
From the tools we need:
- screwdriver
- Sheet metal
- Nippers
- soldering iron
- Flux and tin (for soldering)
First, we disassemble the lighter:
We bend the wires with wire cutters and saw off part of the lighter with a metal blade:
It should look something like this:
Saw off the top of the lighter cap to the same level:
With the help of wire cutters, we bite off the wires so that 1-2 cm “peeks out” from the edge of the lighter:
Then carefully strip the wires:
We treat bare wires with flux:
Next, take a paper clip:
And bite off its lower part:
Then divide it in half:
Then we solder the pieces of paperclip to the wires (previously treated with flux):
Carefully bend the "antennae" and fix them with glue:
Close our shocker with a lid:
Carefully glue the front part, not sparing glue:
The shocker is ready:
Such a shocker is hardly suitable for self-defense; it is better to play a trick on friends with it: wink: