Do you like to organize parties or want to bring friends together and have fun? Surely you have downloaded from the Internet the hottest new dance tracks of the most famous DJs. And what if you yourself do a laser show in home conditions, spending on it no more than 50 rubles? Sounds tempting, right? So why wait if you can start making device for an unforgettable show, especially since at home many will find the materials necessary for this.
First of all, let's watch a video homemade, which, although in English, but most readers will probably understand.
So what do we need?
- Old CD;
- speaker;
- A laser that can be purchased at almost any store;
- Hanger or tin wire;
- Balloon or medical gloves;
- Plastic coffee can.
Even if at home all the necessary materials are not found, they can be purchased for a penny. Let's get started. First of all, we cut a balloon or a medical glove so that we get a piece that can close a plastic jar.
Remove the lid of the jar and cut off its lower part.
Next, fix our ball or glove on the top of the jar. For fixation, you can use ordinary stationery gum. The surface of the attached ball or glove should be as even and smooth as possible, but there is no need to overdo it, since the same surface must vibrate, and therefore should not sit very tightly.
Next we take the old CD and cut off a square piece that will serve as a mirror.
We attach the resulting mirror to a rubber surface using clerical glue.
Now we need to take care of the holder for our laser, which must be made of a hanger or wire.
The device for receiving a true laser show at home is ready. It remains only to fix it on the dynamics. To do this, it is enough to remove the upper part of the body, and glue the lower part of the jar to the speaker.
The vibration that the speaker creates will cause vibration on the rubber surface on which the piece of the disc is attached, when you point the laser beam at this piece, it will reflect it in different directions, creating a beautiful and unforgettable show.