The best gift for a driver friend is a keychain with the GOS number of his car. such souvenirs in production stores are not very expensive, but if you want to buy such a trinket to all your friends, for example, by the new year or February 23, then you will have to pay a decent amount of money.
Let's watch the video homemade:
To make a keychain, you will need:
- plastic ruler;
- file;
- stickers with GOS number;
- stickers with an inscription;
- Double-sided tape;
- vodka or solvent;
- a brush or cotton swab for solvent;
From a plastic line, we cut a workpiece of the size we need and process all the edges with a file.
Since it is impossible to buy stickers with a GOS number, we print it on a printer. Decide on the size of your keychain in advance and print a sticker of the same size.
On the reverse side, print a sticker with the required car brand.
It is not necessary to print on self-adhesive paper, you can use a thick sheet, which will need to be sealed and protected with adhesive tape.
Stick the tape on the number plate, and cut off all the excess around the edges.
Now we glue the numbers on a thin double-sided tape (the tape should not be on a foam basis, otherwise it will be too thick a keychain).
With a solvent or vodka, degrease the surface of the plastic.
Glue the blank with the number on the plastic.
Now we apply a clear varnish to make our key chain visually convex. Varnish should be applied on both sides and sides.
All our keychain is ready.
You can think of fastening independently. It can be an old key ring, a ring with a chain, a simple chain around the neck. Do not forget to make a small hole in the plastic so that you have something to hook your workpiece on.