If you are inspired by beautiful inscriptions on the wall and graffiti, but giving $ 30-40 for a spray can is expensive for you, then try to make it do it yourself. Or you can carry the can with you in the car and if you have a slight scratch, blow it out and save money on the service. Also with a spray can you can easily paint corrugated objects. Let's start manufacturing.
Let's watch the video:
[media = http: //www.youtube.com/watch? v = 6nwOBQs8HXQ]
We will need:
- any empty spray can from deodorant;
- a syringe with a broken needle;
- any paint, you can take ordinary mascara;
- nipple from the bicycle chamber;
- a small pump;
First of all, we need to fill our spray can with ink or ink. To do this, we open the can so that we can see the white plastic that releases the contents from the can and we need a syringe with a broken needle.
Next, open the ink jar and draw the contents of the jar into the syringe.
We insert the syringe into the inlet valve and press on it, slowly pouring liquid (paint) into it. Thus, we fill in the contents we need in the quantity we need.
Now we need to fill our spray can with air, for this we need a bicycle nipple.
We insert the nipple into the inlet valve and connect the pump to it.
It is advisable to do this all with gloves, if you get dirty, then it will be very difficult to wash your hands from mascara. The pressure in the pump should be no more than 5 atmospheres.
If you take more pressure, then you just burst the can and you just sprayed with paint. For our crafts It is recommended to use a seamless spray can, but if this is not at hand, then use any other.
Clamp the valve and begin to pump air.
All spray can is completely filled and it remains only to attach the cap. Start drawing them, the spray can is completely ready for use.
The first 2-3 clicks you may not sneak in, but the subsequent strokes, when the paint completely fills the tube, will already go in a straight line.