How to make a stylus for your phone

New generation phones do not need to be poked with a pencil or a wand to press a symbol, just touch them with your finger - the phone will respond to heat. But not all fingers allow you to precisely click on the symbol that he needs, but the thermal screen on a stick or pencil simply will not respond. In this video you will see how you can make a thermal stylus for your phone do it yourself.

So, let's watch the video:



Materials for making a stylus:
- ordinary helium pen;
- pen-pen;
- a piece of foil in size, like a chocolate bar;
- a small piece of sponge or washcloth;
- A small piece of cellophane or a plastic bag.



We will use the helium pen for the case.

From the pen, we only need elastic, the plastic itself can be thrown to the side.

Let's proceed to the assembly. The stylus sponge should be slightly damp, but not very wet.

If you have seen phone reviews before, then you could see that the wet sponge that was drawn through the glass left stains on the display. So that there are no drops on the display, we need a bag for this.

First, cut a small piece of the bag and wrap a wet sponge in it so that there are no traces of spots on our screen. The sponge should be rolled up in a tight circle.


We need to insert the sponge wrapped in the bag into the rubber band. After we inserted the sponge, we need to push it with an ordinary rod to the second base. You should push the sponge slowly, the package at this time should be fully opened, i.e. you will push only the sponge itself, and the bag will only envelop it.


A small ball (a sponge in a bag) should stick out of our gum.

Next we need a piece of foil, it can be strengthened by folding into a double layer. Ideally, the foil should be rolled into a small flagellum. Handle the foil carefully. It must not be allowed to tear. You can use not a foil, but a vinyl film or a paper clip.


Now, very carefully, we insert the foil into the gum, so that the foil touches just the sponge.We should get a thin metal rod made of foil, which touches the sponge on one side, and on the other side it should envelop the walls of the handle. The part that you will stick out from the gum can be bent or trimmed.


The handle itself is carefully inserted into the gum, while the foil should go away from the sponge to the side.

So we got a thermal stylus that looks like an ordinary helium pen.