Trinkets are needed to store keys. Thanks to the trinkets, we can be calm about the safety of our keys and be sure that they will not be lost somewhere in the house, since a bright key chain is visible better than a gray key. A beautiful and bright keychain can be purchased at a nearby store, or you can make it yourself. We offer you right now to try to create a beautiful keychain made of wood.
You can find out how to do this by watching the video. crafts:
So we need:
- Wooden block (the author uses an old wooden spatula for the kitchen, you can also use a ruler);
- Any image or sketch printed on the printer;
- Transparent adhesive tape;
- Incinerator.
First of all, we take our piece of wood (a spatula or ruler) and glue the sketch or sketches onto it with transparent tape.
Next, we take the burning apparatus and begin to gently burn through all the lines of the picture. To simplify the work, it is recommended to print sketches in a colorless format so that the lines of the picture are drawn more clearly. Use the burner with extreme caution, as this tool is fire hazard and can cause serious harm if used improperly.
When the sketch drawings are burnt out, you should carefully peel off the adhesive tape. The contours of the future drawing or drawings will be visible, but they need to be given the final look. Again we take the burning apparatus and apply the remaining parts of the drawing in a point-like manner. Working in a point manner is easier and safer, so it is advisable to apply drawings in this way.
When we give the drawings the final look, we need to file the necessary pieces for our key chain or key rings.
In order to keep the picture as long as possible, it is advised to coat the keychain with varnish.
Then it remains only to drill small holes to draw key rings through them. Alternatively, you can use special ropes for pendants. If desired, the same technology can be used to create wooden pendants in home conditions.
In the end, we can note the possibility of buying an old burner in the market.Given the primitive design of the device, it can be made at home. We will consider this method in one of the future materials.
