To burn wood like not only many teenagers, but also adults. Beautiful souvenirs are made from wood, which can be presented for the new year, birthday or just any memorable date. Wooden boards with a pattern that you make yourself are in special demand.
We suggest watching a video that will help make a wood burner in home conditions.
For a wood burner, we need:
- a car battery of 12 volts, but if there is electricity in the room, then the battery can simply be replaced with a cord with a plug that will connect to the network;
- electrical tape;
- little supplies for the handle;
- mounts from an old relay to 220 volts;
- 2 aluminum wires with insulation, approximately 2 mm in diameter;
- a thick wire connected to the output;
- a spiral for burning, 0.7 mm thick.
I immediately want to note that from 12 volts the tip burns out very quickly and in order to prevent it from burning out, we simply lower the temperature. The easiest way is to make a rheostat from the same spiral.
We wrap the rheostat on a screwdriver like a spring and simply attach it to the battery. Be sure to make a reliable connection.
We connect one end of the cable that we have from the burner to the battery, and the other end to the rheostat.
To turn on the burner, we attach a rheostat to the second battery terminal. Be sure to attach a rheostat with a clothespin.
Next, proceed to the assembly. We fasten the spiral for burning to the relay using bolts.
We attach wiring to the relay, which will stretch along the wooden handle. We wrap the entire structure with electrical tape. We attach a two-core cable to the wiring, one end of which will stretch to the battery, and the other to the rheostat.
If you do not have a battery on hand, then you can replace it with any other voltage source that can be found in your apartment.
All home burner is ready. You will have enough completely infected battery to operate the device all day.