The disk stand helps to maintain order and find the necessary drives without any problems, because everything is assembled and removed. Today, stands for discs can be purchased in almost every specialized store, but you can not spend too much money and make a beautiful and original stand, having several old and unnecessary discs.
We suggest watching a video useful homemadethen repeat the manufacturing process ^
We will need:
- CD-DVD discs;
- washers;
- nuts on 6 mm;
- ruler;
- marker;
- glue;
- long hairpin;
- scissors for metal;
- drill.
Materials are collected. You can begin the process of making our stand.
First of all, we take the old discs we need and drill two holes on them along the edges just below the middle. For greater convenience and time saving, you can make a template from one disk, then take the rest of the disks and drill holes on the template at once for everyone. The holes should have a diameter of 6.5 mm.
Next, take our hairpin. Cut two pieces with scissors for metal.
Everything you need for our stand is ready. Now you can start the assembly process. It should be noted that the assembly of the stand itself is as simple as possible.
So, wrap a nut on each piece of the stud. Next, we put one disk on the hairpin and put 5-6 washers on top of it. After that, we insert the second disk and again the washers and so on until the end. In the end, we just have to fix and fix the resulting structure with two more nuts on the other hand.
On this, however, the assembly process does not end there. The fact is that the stand in this form will ride, because we did not cut the discs, but left them round. In order to avoid this, we have to make peculiar legs. To do this, take another disk. Using a ruler and marker, draw a line along which we cut two pieces.
The stand is actually ready, because we just have to stick the legs on the two extreme disks of the stand. Gluing the legs is not necessarily powerful means, especially if the stand is not large. It is quite enough to use ordinary super-glue.If the stand is designed for 50 or 100 disks, then you can use the moment or something alternative.