If you have your own online store, where very small goods are put up for sale, which are desirable to photograph with all the nuances, then you can not do without special equipment. Professional cameras cost a lot of money, but we can invest just $ 10.
We suggest you watch a video that describes how to make a lightbox do it yourself
We have to:
- a large cardboard box;
- a large piece of whatman paper;
- scotch tape.
- a knife;
- ruler;
- a pencil.
We draw rectangular windows on the box with a pencil and a ruler.
Such windows will need to be drawn from each side.
We should get a design that resembles an aquarium. One side is completely untouched, and 5 other cut out, only corners should remain.
Now you need to strengthen the bottom. It can be strengthened from old waste. Fasten with adhesive tape.
We should now have a whole one side and a bottom, and 4 other sides - cut out.
We glue the entire inner side with white stripes. Everything that is brown from the box should turn white.
We cut out all the cut out holes with white paper. The walls should be completely white. You need to leave only a hole on one side.
Two sides that we did not paste over with paper, and they remained brown, we paste over with a paper.
We install table lamps on three sides of the box to get a bright light.
All! Lightbox is ready.