If you like high-quality sound, and the headphones that come with your phone do not meet your requirements, then you can make such a headset yourself and you don’t even need to use a soldering iron.
If you are interested in how to make a headset yourself without a soldering iron for your iPad, we suggest you watch our video.
We need only the old headset.
First of all, we remove the headphones themselves from the old headset, we do this in two ways: the first way - just bite off the headphones with wire cutters, and the second - we open the box where the wires are connected and disconnect the two wires with the headphones.
Separate the microphone and the button for the answer. We do not touch them, but leave them unchanged. Now we just cut off the wires that go to the headphones themselves and do not forget to insulate them.
For insulation, we use molar scotch tape, simply wrap the protruding wires around it and put it back into the box.
Instead of headphones, the sound we will now go from the built-in speaker, which we hid in the body to the buttons for pressing the answer.
The clothespin that comes with any headset we just attach to the glue to the box itself, where we have hidden the speaker and answer button.
All the microphone and headset are fully working, now it can be used. Compare the sound quality that came from the headphones and which came out after we installed the built-in speaker in the box.