In the past few years, there have been many more cyclists than motorists. But if everything is clear with the car: I clicked on the alarm, left it in the parking lot and went home, then this will not work with a bicycle, it will not be stolen only from your apartment, and then there is no 100% guarantee that this will be so.
Keep bike it’s not always comfortable at home; a pet can jump on it or a child will catch on it, but if you make a shelf on which it could be broadcast, then you would stop getting confused under your feet.
If you want to make a bike shelf yourself, but don’t know how to do it, then watch the video.
To make a suspension bracket for a bicycle, we need:
- plywood 15 mm thick;
- a circular saw;
- screwdriver;
- electric jigsaw;
- drill;
- pliers;
- flat corners;
- bolts;
- a pencil;
- ruler;
- roulette;
- sandpaper.
From thick plywood, we will cut 4 main parts. Two parts we have to get a size of 25 by 23 centimeters and two parts 25 by 37 centimeters. We will cut the squares.
After 4 squares of the required length are ready, we will need to cut a small groove. This groove is necessary so that the frame of the bicycle can freely pass through the board. In total, we need two boards with grooves.
We got 2 blanks with equally cut grooves. Now they need to be processed with sandpaper. If there are staples on the tree, then they will be removed with an emery cloth during operation, and you will not hurt your fingers.
Further on the inside of the shelf with the help of bolts we install the corners.
Using self-tapping screws, we fasten the side of the shelf to the top of the shelf.
We fasten the bottom of the shelf to the rest of the structure.
The whole shelf is ready, it can be left unchanged, or you can decorate or paint. It remains only to fasten the shelf with reliable bolts to the wall. Now you can raise your bike on it, and it will no longer be confused under your feet.
