And how do you feel about buttered butter? Is not it true that all things that initially seem unusual to us are always the best. For example, you did not think how to make a hanger from a hanger. It sounds very extraordinary, but it turns out creatively.
If you also want to recreate creativity at home, then stock up on hangers and watch the video
[media = https: //www.youtube.com/watch? v = gx-NBjad41s]
To make the hanger we need:
- screwdriver;
- 3 mm drill;
- 3 hangers;
- marker;
- 6 screwdrivers or self-tapping screws;
- a hacksaw for metal;
- a small section of laminate or parquet.
First of all, we must mark the hangers, for this we take one hanger, put it on the plank and reduce it to a minimum in the side. We need the edge of the plank to be flush with the hanger.
Next, make small marks with a marker and do the same operation with 2 more hangers.
Now carefully cut the hangers into 2 parts with a hacksaw for metal. You need to do this in the place where we just put a mark with a marker.
Now we put hangers on the board and put marks in the places where they will be attached .. Hangers must be put with an edge.
Next, with a screwdriver, make 6 holes on the board, two holes on each side. The screwdriver must immediately make holes so that when screwing in the screws it does not split into two parts.
Now screw the screws and screws. We need to connect a piece of wood, a hanger and a self-tapping screw.
All the hanger is ready. It looks very original. There are hooks for outerwear on it, and if you still attach a shelf to the top, you can survive hats or gloves.
By the way, after we cut the hanger, we still have small pieces that can also be attached between two hangers. Subsequently, it will also be possible to hang or put something on them.
The hanger is very easy to attach to the wall with dowels. You can make additional ears and other ways of attaching.
