Changeling - a fun toy that is easy to make do it yourself. It is necessary to slightly push the changeling, as he begins to move independently. The secret is to constantly change the center of gravity.
To get started, watch the video how to make a changeling:
Necessary tools and materials
• Ping-pong ball;
• Glass ball;
• Paper;
• scissors;
• Knife;
• Super glue;
• PVA glue.
Manufacture
Using a knife, cut the ping-pong ball into two halves. It is most convenient to cut along the seam.
If the edges of the cut are not too smooth, then trim them with scissors.
Cut a strip of 3-4 cm wide from a sheet of paper.
Fold the strip into the cylinder and glue its edges. The cylinder diameter should be slightly smaller than the inside diameter of the ball.
Spread one of the edges of the cylinder with superglue and put half of the ball on it.
Put the ball in the changeling. It is recommended that you select a ball made of heavy material such as glass.
Glue the other half of the ball onto the cylinder.
To make the shifter more reliable, it is recommended to additionally strengthen it. Cut another strip of paper and wrap it around the cylinder again.
So the toy is ready. Lay it on a flat surface and push it slightly. The Changeling will begin to independently move with characteristic movements.