Half of the inhabitants of the earth have a flash drive hanging on their keys. What shapes and sizes they do not exist, but if you do not want your personal thing to be like something or someone, then invent an image for it yourself.
If you want to make a creative flash drive, then watch the video and repeat after us
[media = https: //www.youtube.com/watch? v = O3T_GueMZ00]
We will need:
- any flash drive, or rather its main part (insides);
- an empty gas cylinder (it can be bought at a weapons store, it is used for pneumatics);
- plastic, but it must be bent;
- glue gun;
- drill;
- Light-emitting diode.
First of all, we need to saw off the top of the empty gas bottle. If you visually divide the container into several parts, then we will saw off about a third of it.
Now we need to put our flash drive in the center of the cylinder.
The bottle on the opposite side has a small hole that needs to be made a little larger. The hole is made a little larger with a drill. Through this hole, our LED will exit.
The LED itself needs to be soldered to the USB flash drive. Almost at its very base we solder the wires from the LED to the board.
We begin to solder the LED to the board. On the right side we should have a plus, and on the left a minus.
In the hole that we expanded with a drill, we pass the LED a little. It is not necessary to protrude it all, it is enough that its head looks a little.
Now we need to make plastic circles with slots for the core of the flash drive.
We also need a strip of flexible plastic, from which we will then make a square.
We also cut out triangles for the square, they will serve us as stabilizers.
With a glue gun we fix triangles on a square.
We also pour a glue gun inside our bomb, leaving only space for the flash drive itself. The space for the flash drive is done after you already pour glue into the bomb. When the glue gets a little sticky, just insert the USB flash drive there. Around it will form free space.
We attach our square to the body from the gas and you can start painting.To do this, take a spray can of paint and spray it with a balloon in all directions. Do not forget to stick the part of the flash drive that will be inserted into the USB port before using this tape.
In the end, you can apply a drawing to the side of the bomb. All flash drive is ready, now you can use it.