Every second inhabitant of the planet has computers today, but not everyone has accessories for them. The reasons may be different: no money, no time or no desire. We suggest that you independently make a mouse pad and use it to your pleasure.
Watch a video on how to make a mouse pad:
[media = https: //www.youtube.com/watch? v = S6aeIDVcJxY]
We will need:
- a piece of thick cardboard;
- self-adhesive paper;
- scissors;
- glue;
- a newspaper.
The first step, we take a simple pencil and begin to draw on a dense piece of cardboard our shape for the future rug. The cardboard should be completely flat, if you take it with a bend, then passing through it, the mouse will not always catch the signal.
Next, tear the newspaper and pieces of glue on this cardboard. Do not spare the PVA glue for this.
Pieces of the agile newspaper at the very end should be sealed with one whole piece. We bend the edges from a piece of newspaper and also glue it.
We glue another piece to this piece, but we do not bend the edges anymore, as we did before, but cut it off with scissors.
Leave the cardboard with the paper pasted on it for a certain time, so that the newspaper can saturate well with glue and dry. By the way, the newspaper in our work is needed to give additional space. When using cardboard just does not bend.
Next, we take self-adhesive paper and stick it on this cardboard. To do this, take a blank of cardboard and newspaper, apply it to the inner side of the film and circle it all with a pencil.
Glue the film carefully to the workpiece. If you make the mat round, then make a few cuts on the film to bend its edges under the bottom of the mat.
All our mouse pad is ready and now you can use it.