Furniture - It is an integral part of our interior. There is a small list of furniture that is found in each of us, the difference is only in shape, size and color. So, an urgent need for any apartment is a table. It can be made to order or made by yourself. If you do not trust various manufacturing companies, then try to make it yourself.
Watch a video on how to make a computer desk without much cost and effort
We will need:
- locks;
- board for the countertop itself;
- a file on a tree;
- screwdriver;
- furniture key;
- boards for sidewalls;
- legs.
If you do not want a regular square tabletop, you will have to cut it out so that the table becomes the shape you need. We will make the gold standard, with a recess for the workplace.
Now we need to attach the sides to our cover. They will be connected using locks. A bolt is inserted on the back of such locks, this is necessary to fasten everything.
The collection timeline is the wall of the table, the leg of the table, the wall of the table, the leg of the table. There should be 3 locks on each edge of the walls and legs.
Also, three locks, but already across the horizontal should be on each side.
First we put and tighten the walls, if you first put 1 and the second leg, then you just do not put the walls later.
You already have two legs, a table top and two side panels, now you need to put a leg that will hold the corner of the table. It is fixed with ordinary screws using a furniture key.
It is important if you have a shelf in your table, first a shelf is installed and only then all sides of the table.
After the shelf, countertop, sidewall and legs are assembled, we turn the table over and tighten all the bolts and locks with a furniture key so that the table does not fall apart during operation.
If you need a regular table, then consider that you have already assembled it. If the table is with shelves, then it's time to start screwing the shelves.
We start with the side mounts. Our regiments will be on them. Do not forget that all fastenings are with our internal locks. If you use ordinary screws, then the joints will be very visible and striking, and this gives the impression that everything is glued.
First we collect the shelves on the right side, then on the left side and at the end we already fix the center.
Insert shufuletki (if any).
We cover the back side with a piece of large plywood.
All the table is ready.