A garden light is needed in every plot. It can become not only an ordinary light source in the dark, but also a beautiful decorative solution that can decorate a site. Garden lanterns these days cannot be called scarce goods, but it is much more pleasant to watch and admire things done by yourself, so we suggest you make a beautiful lantern right now.
Before moving on to the process of manufacturing the flashlight itself, let's watch a video in which the entire process is described in detail.
We will need:
- LED Strip Light;
- two banks, one of which should be smaller;
- drill;
- drill;
- furniture bolt;
First of all, we need to drill through the hole in the middle of the lids from the cans. After this, the covers must be connected with a furniture bolt.
The next thing you need to take care of the place for the conclusion of the wires. To do this, we need to drill a hole at the bottom of a small jar.
Materials for the manufacture of a garden lamp are almost ready. Now we have to cut a piece from the tape of the size we need and solder two wires to the tape contacts.
Next, just glue the tape to a small jar. The author wraps the ribbon in the form of a spring, however, you can dream up and create unique silhouettes and even drawings, which will give the flashlight an even more unique and original look.
You can also put a 12 volt stabilizer inside the small jar, which the author of the video prefers not to do.
To withdraw the wires from the flashlight, drill two holes on the lids of the cans. If desired, you can tie the wires remaining inside the jar into a knot. This will allow you to hang the flashlight without extra thread.
Now you need to take care of protecting the flashlight from moisture. To do this, you need to smear the sealant on the holes from which the wires exit. For the best effect, it is advised to take a plastic cover, drill a hole in the middle and attach to the bolt.
Such a flashlight consumes very little electricity, which will leave it turned on all night.In addition to a garden lamp, the same lamp can serve as a light bulb in the basement, cellar, the garage and even at the gate. Thus, in just 15 minutes you can make a beautiful and original lamp that will not only not please the eye, but will also save a lot of money.
