Sometimes you want to create a romantic atmosphere in your home. For this purpose, the aroma lamp is the best suited. It not only burns, but also fills the room with a light pleasant smell. Unfortunately, aroma lamps cost a lot. It’s understandable: you pay 90% of the cost for the design. It’s better to make an aroma lamp do it yourself, and for the money saved, purchase the oil itself.
To get started, watch a video on how to make an aroma lamp:
Materials and tools for manufacturing
● Two cans;
● A small flat candle;
● Paper;
● Kapron threads;
● Silicate glue;
● Salt;
● Aromatic oil.
Manufacture
Roll out three identical thick rolls of paper. Their length should be approximately 10 cm.
Take two cans. It is recommended to use low tin containers from sprats, gobies, sprats. It is good because it does not have a seam at the bottom.
Thread paper rolls to the sides of the cans to fasten them together.
Thoroughly thread the threads with silicate glue.
Light a candle and place it in the lower tin can.
Fill the top jar with half water. In order not to wait until the water heats up from the flame of a candle, you can use boiling water.
Pour a teaspoon of salt onto the paper and drip five drops of aromatic oil into it. Salt is needed to make the oil evaporate better.
Pour salt over the top tin and enjoy the pleasant aroma emanating from the aroma lamp.