Many love different spyware fixturesthat allow you to listen to, view conversations and meetings unnoticed by others. If you also consider yourself a fan of spyware and want to have your own spy phone, then this material will be useful to you, since we will consider how to make a spy phone in home conditions.
First of all, we offer you to watch a video showing the manufacturing process of such a phone
So what do we need:
- push-button telephone;
- transistor BS440-4, KT315V, KT203A or other analogue;
- screwdriver;
- electrical tape;
The author uses 4 different transistors. The author’s one of them was made in China and removed from the monitor’s power supply, the other one was imported BS440-4, and the other two were made in the USSR - KT315V, KT203A. What you need to know before you start making a spy phone? You need to know on which of the terminals of the transistors the collector is located, on which base and on which emitter. This will be quite enough to make such a device. You can get to work.
Before starting work, it should be noted that for the bug to work, you must enable the automatic answer to the call.
First you need to completely disassemble the phone.
Next, you need to seal the central button with electrical tape. This is necessary, since we will solder two wires to the central button on the board and we do not need to have a contact on it. It should be noted separately that the central button should be used only on those phones that use it to answer calls. On relatively new models, a separate button in the form of a green tube is provided for this. In such cases, it is clear that the same procedure needs to be done with this button.
The next thing we need to remove the speaker, which plays the melody during a call, a motor with an offset shaft or, more simply, a vibrator.
We need to make sure that our phone is not possible to expose. Therefore, you can also remove the button illumination LEDs. In fact, we only need the contacts of the SIM card, power, antenna and microphone. Thus, we do not expose the phone to any visible upgrades.
We also glue the display contacts so that it does not display any information, the speaker contact.
Take the BS440-4 transistor. The transistor collector is soldered in the middle of the central button, the emitter is on the round part, by which the button is circled, and the basic output is to one of the speaker contacts. There is no definite option, which means that you need to try one at a time.
According to the author, the very first transistor - BS440-4 showed itself in the best way. In order for the bug to work, you just need to call the phone. The auto answer function for calls will turn on the connection and on the other end you will hear everything that is happening on the spy phone.
