Everyone wants his house to look stylish and comfortable. There are many different ways to do this, and one of them is using the original lighting. It is very rare in such cases that floor lamps are used and in vain. I want to offer you the design of one of such lamps.
To make it you will need:
- four long wooden slats or bars with dimensions depending on the size of the lamp;
- twenty short bars;
- the cloth;
- LED Strip Light;
- fasteners.
First of all, two ladders are assembled from long bars with short crossbars. In our case, five short bars are used for each ladder. Then the ladders are interconnected by short bars in the same amount. Thus, the frame of the future lamp is obtained. Then the frame is covered with fabric, which can be fixed with glue or a stapler. Choose a fabric to your liking so that it harmonizes with the interior and has a certain light transmission.
If you very neatly fit the frame, then you do not need to do anything else with it. And if any flaws are noticeable, then on top of the frame you can glue the corners that are used for MDF panels.
It remains to skip the LED strip inside along the length of the lamp, fix it in a convenient way and connect it to the network.